|Voltage:||380v, 415v, 440v, 460v||Control:||Electric Control Cabinet|
|Features:||Large Production Capability, Continuous Operation||Color:||As Customer Required|
|Applicable Industries:||Manufacturing Plant, Construction Works , Energy & Mining||Capacity:||1-100 T/h|
|Weight (KG):||15 Tons||Application Of Rotary Drier:||For Cement, Chemical, Metallurgical, Building Materials Industries.|
Gypsum Industrial Rotary Dryer,
440v Industrial Rotary Dryer,
440v Gypsum Rotary Dryer
Energy Saving Industrial Rotary Dryer For Sand Cement Gypsum
Working principle of rotary drier
Its principle of operation: the raw material plate which is arranged reasonably with changeable angles in order, throws moisture materials into the rotary cylinder. Then water will be separated from the materials by hot air-flow and changed into vapour to be discharged into the atmosphere. Then the materials would be dried.
|model||cylinder diameter||cylinder length||inclination||Rotate speed/RMP||weight||power||Volume/CBM|
Compared with other dryers, the rotary dryer have the following features:
Operating principle of rotary dryer:
Wet materials is carried to hopper by belt conveyor or bucket elevator, and added in from the top of feed opening. The cylinder is the main body of the dryer, the material through internal cylinder will contact with the hot air through it in the form of direct flow or reverse flow, or make an efficient contact with the heated wall surface and be dried. After drying, the products will be discharged from the bottom of the other end. In the course of the drying, the materials will move from higher end to lower end in the action of gravity with the help of the slow turning of the cylinder. The cylinder wall is equipped with downstream shovelling plate, which constantly lift the materials and sprinkling it down, so that the heat contact surface of materials is greatly enhanced, improving the drying speed and driving the materials to move ahead. After heat carrier (hot air, flue gas) drying material, the waste gas is evacuated after the carried dust is collected by the cyclone dust collectors. Rotary dryer is one of the oldest and mature drying equipment. The diameter and length of the cylinder is determined by the technological conditions, the size of which reflects the production capacity. The load of the cylinder is mainly determined by self weight of cylinder, the quality of the lining and materials etc.
Contact Person: laura